Coupled Multielectrode Sensor (CMS) Probes

CMS Probes with Flush Mounted Electrodes

Typical Applications:

Quantitative Corrosion Monitoring and Electrochemical Studies for:

• Pitting corrosion
• Crevice corrosion
• General corrosion (most types)
• Inhibitor evaluation
• Cathodic/anodic protection

in the following environments:

• Aqueous solution
• Humid gases
• Soil
• Oil-water mixture
  

CMS Probes with Exposed Electrodes

Typical Applications:

Quantitative Corrosion Monitoring of:

• Pitting corrosion
• Crevice corrosion
• General corrosion (most types)
• Cathodic/anodic protection effectiveness
• Coating evaluation

in the following environments:

• Aqueous solution
• Soil
• Oil-water mixture
• Under coating

Exposed electrodes increase the sensing signal for an extremely low corrosion rate and reduce the effect of crevice between the electrodes and the insulation materials. An exposed electrode can be painted with coatings and be used for undercoating corrosion monitoring.

CMS Probes for High Temperatures and High Pressures

Typical Applications:

Quantitative or Qualitative Corrosion Monitoring of:

• Pitting corrosion
• Crevice corrosion
• General corrosion (most types)

in the following environments:

• Super critical water systems
• Steam generators
• High temprature and/or high pressure reactors
• High pressure pipelines
• Furnaces
• Fireside of boilers
• Flue gas stacks