|
|
CP Test Station
for Harsh Environments
|
View PDF version 
|
The Metal Samples Harsh Environment CP Test Station provides a complete solution for making pipeline potential measurements. The test station provides connection and measurement points for the pipe/structure, two CP coupons1, and an optional reference electrode1. The test station also provides two interrupt switches which can be used to temporarily disconnect the CP coupons from the pipe or structure to conduct instant-off measurements.
The test station is housed in a 316L stainless steel weatherproof 2 enclosure and utilizes corrosion resistant components, allowing it to be used in harsh environments. The test station is designed to mount directly onto a 3" conduit fitting1, making installation simple.
1 Items sold separately.
2 Requires proper installation to maintain weatherproof rating.
|
|
| Enclosure Specifications |
| Material: |
316L SS |
| Rating: |
Weatherproof (NEMA 4X/IP66) |
| Hinge: |
316L SS, Continuous |
| Latch: |
316L SS, Toggle, Qty. 2 |
| Mounting: |
3" Conduit Entry (Bottom) |
|
 |
|
| |
| Hardware Specifications |
| Hardware Material: |
316L SS, Nickel, Tinned Copper, Brass |
| Panel Material: |
G10 FRP |
| Terminals: |
Pipe/Structure (Qty 2)
CP Coupon 1 (Qty 2)
CP Coupon 2 (Qty 2)
Permanent Reference Electrode (Qty 1) |
Terminal Labeling:
|
Polycarbonate, Sub-Surface Printed
|
| Switch Specifications |
| Type: |
Magnetic Reed |
| Contact Resistance: |
150 m or Less |
| Switching Current: |
0.25 Amps DC Minimum |
| Temperature Range: |
-20 to +70°C or Better |
|
|
|
|
Typical Installation*
|
* Actual installation may vary depending on project and site requirements.
Some equipment shown is optional and is sold separately. |
| |
| |
|
|
|
